Yu Aramid Vis 250

Yu Aramid Vis 250 is a 250 ±10 g/m² fabric in a 3/1 Twill construction. Fibre composition: 53% Viscose fr (cv fr) 40% m-Aramid (m-AR) 5% p-Aramid (p-AR) 2% Carbon(CF).

Weight: 250 ±10 g/m²
Construction: 3/1 Twill
Composition: 53% Viscose fr (cv fr) 40% m-Aramid (m-AR) 5% p-Aramid (p-AR) 2% Carbon(CF)
Fabric width: 1600 ±20 mm

Values are source-product references; confirm the final product and document scope.

Specifications and test references.

Technical parameters with source-listed tolerances and test methods.

Yu Aramid Vis 250 — technical reference
Parameter	Value	Test / standard reference
Fiber	53% Viscose fr (cv fr) 40% m-Aramid (m-AR) 5% p-Aramid (p-AR) 2% Carbon(CF)	EN ISO 2076
Yarn	Warp:30/2Ne; Weft:30/2Ne	EN ISO 2060
Weight	250 ±10 g/m²	EN ISO 3081
Width	1600 ±20 mm	EN ISO 3932
Tensile Strength	Warp > 1200N; Weft > 1000N	EN ISO 13934-1
Tear Strength	Warp>60N ; Weft>50N	EN ISO 13937-2
Dimensional Change	-3% < Length < +3% ; -3% < Width < +3%	EN ISO 5077
Rubbing Fastness	4-5	EN ISO 105 X12
Perspiration Fastness	4-5	EN ISO 105 E04
Washing Fastness	4-5	EN ISO 105 C06
Dry Cleaning Fastness	4-5	EN ISO 105 D01
Hypochlorite Fastness	4-5	EN ISO 105 N01
Peroxide Fastness	4-5	EN ISO 105 N02
Hot Press Fastness	4-5	EN ISO 105 X11
Light Fastness	4-5	EN ISO 105 B02
Perspiration Light Fast.	4-5	EN ISO 105 B07
pH	4.0-7.5	EN ISO 3071
Azo Test	No Azo Colorants.	EN ISO 14362-1
Quality Management	Done	ISO 9001
Flame and Heat Protection	Yes	EN ISO 11612
Antistatic	Yes	EN ISO 1149-5
Arc Protection	Class 1 (4kA)	EN ISO 61482-1-2
ATPV	> 8 cal/cm²	EN ISO 61482-1-1
Chemical Resistant	Yes	EN ISO 13034

Source-listed finish and function references

Lenzing Fr · EN 11612 · EN 1149-3 · EN 61482-1-2 · EN 13034 · Oeko Tex Standard 100 · EN 1149 · EN 61482

This table is a product reference, not certification-body approval or a certificate issued to Yusuf Uçar. Protective garment selection must consider the use risk and approved product documentation.

Applications.

Garment linings
Oil and gas workwear

Viscose FR content supports development focused on moisture absorption and wearer comfort.

The source describes outdoor use in warm regions, with an emphasis on moisture absorption.

Care reference.

40 °C Machine Wash
No Chlorine Based Bleaching
Can Be Tumble Dried On Low Heat Setting
Maximum 150 °C Warm Iron
Suitable for Dry Cleaning

Wash and bleach conditions are source instructions. Confirm compatibility with the flame-retardant finish, any 100-wash claim and the approved product care label.